|
VX800 Carburetor Specifications
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
USA (except California) |
||
Carburetor type |
MIKUNI B53655 (No.1) |
MIKUNI BD53655 (No.2) |
Bore size |
36 mm |
|
ID. No. |
45C10 |
|
Idle r/min. |
1200 revs/min. |
|
Float height |
27.711mm (1.091 in) |
9.11mm (0.3610.04 in) |
Main jet (M.J.) |
#132.5 |
#120 |
Jet Needle |
5E69 -1st |
5D47- 1st |
Needle Jet |
F-ri |
PA |
Throttle Valve |
#115 |
#110 |
Pilot Jet |
#H9 |
#HL1 |
By Pass |
0.8mm x 2PCS |
0.8mm x 3PCS |
Pilot outlet |
0.8mm |
1.0mm |
Valve Seat |
1.5mm |
|
Starter Jet |
#25 |
#22.5 |
Pilot Screw |
(pre-set) |
(pre set) |
Pilot Air Jet |
N0.1: (#65), No2 (2.0mm) |
No1:(#65), N02: (1.2mm) |
Throttle Cable Play |
0.5 - 1.0mm |
|
Do not trust these figures - Buy a manual !